| Imager |
1/2.8" 230Mega pixel CMOS (SONY: IMX136), Rolling Shutter |
| Active Picture Element |
1936 (H) x 1096(V) |
| HD Active Picture Element |
1920 (H) x 1080 (V) |
| Optical Size |
5.44 (H) x 3.09 (V) mm |
| Cell Size |
2.8 (H) x 2.8 (V) µm |
| Scanning Method |
Progressive |
| Minimum Scene Illumination |
TBD |
| Sync System |
Internal |
| Video Output |
?C |
| ?C DVI Model |
DVI 1.0 conformity RGB, 1080P60,1080P59.94, 1080P50, 1080P30,1080P29.97, 1080P25, 720P60, 720P59.94, 720P50 (Defalut:1080P60) |
| ?C SDI Model |
3G-SDI(SMPTE424M Compliant), 4:2:2 YCbCr 10bit 1080P60/59.94/50 HD-SDI (SMPTE292M Compliant) 4:2:2 YCbCr 10bit 1080P30/29.97/25 720P60/59.94/50 |
| ALC |
Can be configured via the UART communication with auto electronic shutter and AGC |
| Shutter Speed |
Adjustable shutter speed via the UART communication (AEE) (Default: Auto) |
| ?C Extended |
Extend shutter frame unit (Up to2.55 sec) |
| ?C High Speed |
Up to 1/10,000 seconds |
| Gain |
AGC or Fixed gain selectable via the UART communication 0 to 45 dB |
| Gamma |
Selectable gamma through 5 preset (one preset is manual, / 0.45 / 0.6 / 0.8 / 1) Selectable gamma via the UART communication (Default: manual) |
| White Balance |
Auto white balance / manual white balance / push to set white balance Selectable white balance via the UART (Default: Auto white balance) |
| Wide Dynamic Range |
Wide Dynamic Range OFF/ON (Defalut:OFF) WDR enable via the UART communication |
| Mirror Image |
Normal image / horizontal flip / vertical flip / horizontal vertical flip(180 degree rotation) Default: Normal image |
| Picture Modes |
8 user preset mode, Normal picture mode or pseudo color mode can be selectable Selectable picture mode via the UART communication (Default: Preset 0) |
| Line Generator |
Both horizontal and vertical with all available colors (Line number: 2) Adjustable thickness via the UART communication ( Default: Disable) |
| Shadow Mask Generator |
Both horizontal and vertical with shading level adjustment via the UART communication( Default: Disable) |
| Freeze Image |
Selectable Live image or freeze image via the UART communication |
| Communication |
+3.3V UART communication via 3.5 stereo jack Baud rate: 38,400bps, 19,200bps, 9,600bps |
| Character Generation |
Built-in character generation function via the UART communication |
| Pixel Blemish Collection |
Support |
| Power |
|
| ?C Input Voltage |
+9 to +15 Vdc (Typical: +12 Vdc) |
| ?C Consumption |
4.4W(preliminary) |
| Dimensions |
40 (W) x 40 (H) x 51.1(D) mm (Excluding the connector) |
| Optical Filter |
IR cut filter with OPLF |
| Material |
Aluminum (AC) |
| Lens Mount |
C mount (Recommendation F: more than 2.0)) |
| Interface Connector |
|
| ?C Video Output |
DVI Output HDMI connector,SDI Output BNC connector |
| ?C Power Input |
+9 to +15 Vdc (Typical: +12 Vdc) |
| ?C External Control |
3.5 stereo jack with SW board |
| ?C Communication |
3.5 stereo jack |
| Weight |
Approximately 116g |
| Operating Temperature |
-0 to 40 deg. C |
| Storage Temperature |
-30 to 65 deg. C |
| Vibration |
20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, XYZ 3 directions 30 min. each) |
| Shock |
Acceleration 38G, half amplitude 6ms, XYZ 3 directions 3times each |
| Standard Compliancy |
EMS: EN61000-6-2, EMI: EN55022 (Class B) |
| RoHS |
RoHS compliant |
